This spring, All Angels Church on Long Boat Key is hosting an exhibition of 23 my icons and I am looking forward to sharing them with all the people in the Sarasota area. Here’s a link to an article about it: https://www.yourobserver.com/news/2024/apr/03/icongrapher-painting-prayer/
Also attached here is a flyer with all the details- hope you can see it!
Painting Icons using egg tempera paints requires that we use a solid, stable support that is also absorbent for the many layers we need to result in the jewel like appearance of icons.
Traditionally, poplar boards have been used that are coated in rabbit skin glue (as a sealer) and then between 8 – 14 layers of natural gesso, sanded in between layers. The result should be a polished, smooth surface that is also highly absorbent. Natural gesso is not the same as the acrylic gesso most people are familiar with. Natural gesso is made using rabbit skin glue and chalk or marble dust.
Today there are many more modern materials that iconographers are experimenting with in part because the process of preparing an icon board is lengthy and requires a lot of physical effort and time. Natural Pigments makes a product, “easy Gesso”, that seems much easier to use and works well, especially for beginning students. https://www.naturalpigments.com/mediums-grounds/gesso-primers/gessoes/easy-gesso.html
After the rabbit skin glue has dried, trim the edges of the boards.
Also, I tend to use Baltic Birch Wood panels because I feel they are less prone to warping than more traditional woods.
Below I will provide an explanation of how to prepare and gesso an icon board that I trust will be helpful. If you should choose to experiment with other materials and find success, do write to me and I will add that to this list.
Icon Board Materials
Baltic birch panels of various sizes, a sauce pan and another container for mixing the gesso. I use recycled plastic or glass containers about the size of a large yogurt container. Distilled water, measuring spoons, measuring cup, wood spoon to stir, oxgall liquid, glycerin, marble dust or chalk, rabbit skin glue, 2″ bristle paint brush from the hardware store, 3 grades of sand paper- 300, 600, 1200 grit. Muslin or linen large enough to overlap the icon boards’ dimensions by 1 inch all around.
Set up your workspace with a long table covered with a painter’s drop cloth. I like to use one that I can dispose of when the whole process is finished because it will get quite messy.
Steps to Gesso Icon Boards
Linen drying on the boards, having been soaked in rabbit skin glue.
Several layers of gesso are applied and then sanded.
Measure 2 Tablespoons of Rabbit Skin glue into 2 cups of distilled water, stir well. Let sit until glue is completely absorbed and expanded- 2-4 hours.
Place glue mixture in a container that rests in a saucepan , double boiler is good), containing 3 inches of boiling water and let the glue melt. Be careful it doesn’t get too hot- do not boil the glue mixture! 135 degrees Farenheit is too hot!!
Next, using the 2″ Bristle brush, coat both sides and edges of each board with the glue. Let each side dry about 2-4 hours. This will prevent the board from warping and will keep out atmospheric moisture in the future.
When the boards have dried, the next day, you can mix up some more glue This you will use to, first, coat the dry icon boards with it. Second, dip the pre cut linen into this glue mixture and spread evenly on the board. Smooth out wrinkles- I use plastic gloves.
Next day, use a mat knife to trim edges of over lapping linen.
Time to trim the edges of the linen- when they are completely dry.
Now it’s time to make the gesso itself! Make the glue- 2Tbs rabbit skin glue added to 2 cups of water – as before. Let soak, then warm until completely dissolved, as above.
When the glue is ready, using a sieve, gradually add approx 3 cups of whiting – chalk or marble dust. I also add 1 teaspoon of oxgall liquid and 1 tsp of glycerin. These are dispersion agents and they are optional. I use Kremer Chalk from Champagne K 58000, and/or marble dust K 58500. I often make a mixture of chalk and marble dust but you can use just the chalk as well.
When this is ready, start putting layers of gesso on the boards, letting them dry in between layers. It doesn’t take too long for each layer to dry- in the summer it might take 1/2 hour.
After 3 or 4 layers, I usually give the boards a rough sand to take off any bumps or rough spots. This can be done with a wet sanding method described in the video below, or with regular sandpaper. The wet sand method is my choice, usually. Don’t forget to coat the edges of the board. After 6 layers I sand again. Then, a final sand after the last 2 layers. You can make anywhere from 4-8 layers. Use the finest sand paper for the final sand and you will get a beautiful smooth surface ready to paint on!
There are several videos on you tube showing different approaches to gessoing an icon board. You might want to watch this, or one like it, all the way through before starting. Icon boards video by Paul Stetsenko. Or, if this is too much bother, you can always order an icon board!! I have included some new sources on my website on the student resources page.
Happy Icon Painting!
May God bless you and guide you in all of your endeavors in this Holy ministry.
Christine Hales
My ONLINE ICON WRITING CLASSES: I offer many pre-recorded icon writing classes at Online.iconwritingclasses.com.
Work is a holy gift. In his Rule, Benedict states that all tools of the monastery are sacred and worthy of reverence. What are the sacred tools of the work we do?
Read More
Face of Jesus Icon by Christine Hales
ORIGINS OF CHRISTIAN ART
In my quest to create and fully understand sacred and holy images, I feel the need to go back in time and understand how the first Christian images were created- and why. I recently wrote an article for the American Association of Iconographers on this subject and I will pull a few quotes from it here. To read the entire article click here.
PANEL PAINTINGS
Ancient Panel paintings derived from the Egyptian panel paintings of gods and goddesses, therefore, the very early Christian panel paintings have similar compositions and figures replacing images of Egyptian gods with Christian imagery . As Christians found NEW WAYS OF VISUALIZING THE DIVINE, specifically in mosaics, Icons, and mural paintings for monasteries, icon panel paintings began to flourish.
The theological significance that Christians gave to their icons was in many ways more exalted than the ancient Egyptians had given to their sacred images. As the Christian movement spread, naturally, each culture depicted Jesus as looking like them. To the Chinese, he looked Chinese, to the Indians, he looked Indian, to the Africans He is black, and so forth. The icons of early Christianity were expressions of beliefs and Biblical stories.
In the fourth century there was a move away from statuary. Icon painting, illumination, and mosaics became the primary methods of representing the Divine. Icons proliferated at this time, with many different styles of depicting Christ.
ICONOCLASM
By the seventh century, theological debate arose over the belief that the icon was incarnational- its holiness deriving from the fact that because God had assumed physical matter, the icons could be a valid representation of God’s presence also. The iconoclastic controversy arose at this time with heated debate and at times whole sale destruction of icons if they were perceived to violate the second commandment. It requires the second council of Nicea in the ninth century to resolve this issue. Icons were intimately connected with the origins and growth of Christianity itself.
Next month will be Part II, moving forward from the Nicean Council and Saint John of Damascus’ brilliant defense of icons to present day developments in religious imagery that builds up the church. I feel that a thorough understanding of the history of Christian art will be an invaluable aid to those of us creating icons and religious imagery today.
MY BOOK ON CREATING ICONS THAT COVERS MUCH OF THE HISTORY PLUS MORE!
I have written and published a book called “Eyes of Fire”, How Icons Saved My Life As An Artist” available on Amazon that also brings together knowledge and understanding of art and the Art Spirit through the ages, with a bias towards Byzantine iconography.
I HAVE ALSO RECENTLY given a talk to the Church of the Redeemer in Sarasota, Florida, on the subject of “Origins of Christian Art and the Images of Jesus”. Here is the you tube link for that talk: https://youtu.be/i_kKo9-Zbn0
Please comment if you have enjoyed this or the related materials or have questions.
Blessings, Christine Simoneau Hales